Pipe Cutting Machine – Always Check All Choices Whenever You Are Examining Deciding on a Tape Binding Machine.

Laser cutting machines are incredibly fast and accurate computer-controlled cutting machines, providing a myriad of good things about an array of fabricators who cut metal plate, sheet along with pipe. In many cases, they can be the best choice. In some cases, and especially regarding cutting and fabricating pipe, plasma might be the better option. On this page, we shall explore the benefits of laser cutting on the whole, along with with regards to pipe. We’ll offer an answer in which the laser cutting process still makes lots of sense, detail some of its boundaries, and present an instance for purchasing wire cutters, and why it might be your better option. Armed with the important points, you possibly can make a much better-informed decision.

A laser is actually a way to obtain electromagnetic radiation that emits light inside an almost parallel beam. The intensity of the beam is indeed large which it melts and vaporizes material, to ensure very narrow and precise cuts result. This is especially beneficial when cutting thinner gage flat plate metal and sheet. Laser pipe cutting machines may also be built with computer-controlled programming that determines how and where the interface is integrated with the material. While laser pipe cutting machines often provide great benefits, they may have their limitations:

Why you need to consider laser cutting machines for plate, sheet or even pipe?

Laser cutting is definitely an accurate cutting technique.

Limited probability of material deformation due to the small heat-affected zone.

Laser cutting is certainly a fast and very productive cutting process.

Laser cutting machines are computer-controlled machines using a high level of automation, which limit the necessity for operator interface – unmanned systems.

Laser cutting accuracy and precision produce very narrow kerf, providing closer nesting of parts, resulting in minimum material waste.

Laser cutting machines cut without generating noxious fumes.

Which fabrication work makes laser cutting meeting its boundaries?

While laser cutting machines may give a fast, versatile and accurate approach to cut pipe, flat plate and sheet, you will find limitations:

Laser cutting is normally employed for thinner materials, however some machine configurations can cut pipes up to 32 mm thickness.

Laser cutting is typically employed for cutting without bevels. Consequently, many pneumatic wire strippers either do not have bevel cutting capabilities or the capability is not a primary focus.

Laser cutting machines are extremely expensive, making an investment high enough to ensure that running just one single production shift is not nearly enough for fabricators to comprehend a speedy return of investment (ROI).

Laser cutting machines are becoming more and more common and there are other plus more job shops with laser cutting machines in any given manufacturing area. Consequently, the market is now more competitive, resulting in lower outsourcing costs, which in-turn definitely makes the return on any purchase investment that much more challenging to repay.

Laser cutting machine expenses are relatively high because of the following:

High costs to purchase the cable strip crimp machine.

Higher energy consumption.

Higher operating costs.

While productivity 04dexspky thinner materials can be very high, laser cutting becomes less efficient as the material thickness increases.

Laser cutting machinery typically requires personnel using a higher-level of technical and professional capacity to perform maintenance work that is certainly typically more advanced.


Laser cutting technology is best suited when you need extremely fast and accurate plate and sheet cutting, or maybe if you cut and fabricate thin-walled pipe material. If you have to cut pipes with larger wall thicknesses and need to take full advantage of a reduced priced automation solution, then plasma pipe cutting machines supply a more cost-effective alternative and solution.

Plasma pipe cutting machinery, including our TCL400 Tube Cutting Line, provides a fast, accurate and fewer expensive alternative than laser pipe cutting machinery. Beveling is a primary feature and focus. By integrating the newest advances in high-definition plasma, accuracy is a lot improved. Finally, when it comes to plasma smoke, HGG plasma machine installations add a system that captures and safely eliminates noxious fumes.